Searching...
 
 
 

Job Application 

HURST
FT. WORTH
ARLINGTON
SOUTHLAKE
HOURS
M-F  10-7
SAT  10-6
SUN   1-5

SHOP ONLINE
 
 
 
 
Name:
Sign-up to hear about our specials and events.
Visa MasterCard American Express Discover PayPal
 

How To Shift SRAM DoubleTap Levers!

Shifting (also called changing gears) is the secret to riding comfortably and efficiently whether you're climbing and descending, sailing along flat stretches with Amazing shifters!glorious tailwinds, pedaling purely for pleasure or going for glory. And today bicycles are easier, more efficient and more fun to shift than ever thanks to modern shift levers integrated into the brake levers (or right next to them). These amazing levers let you change gears almost as fast as the thought crosses your mind. And you never even need to move your hands from the handlebars!

We get a lot of questions on how to shift so we've put together this illustrated guide that demonstrates how to shift the SRAM DoubleTap shifting system, which is found on many road bicycles. We're always happy to demonstrate in person, too, whenever you'd like to swing by.

We're assuming that at some point you've ridden a multi-speed bicycle like a 10-speed that was equipped with derailleurs and shift levers, and you're familiar with the basics of how to shift. In case it's been awhile, here are a few helpful tips and the basic terminology:

  • There's no "right" or "wrong" gear to be in. You shift according to feel. As the terrain changes you operate the shifters to make it easier or harder to pedal depending on what feels right to you. Also, bikes aren't like cars. In other words, there's no need to start off in first, shift into second as you pick up speed, then third, etc. On a bicycle, you find the best gear for where you're riding by shifting until it feels right to you. With experience this gets easy and becomes almost second nature.
  • You have to be pedaling in order to shift, however, it's important to ease the pressure off the pedals when you shift. This is easy when you're heading downhill or rolling along the flats, however, approaching an uphill you'll need to anticipate the need to shift, pedal a few times so you build up a little speed, and you can then ease off the pedal pressure and shift into an easier gear.
  • In general, you operate one shift lever at a time, and shift across one cog or chainring at a time (some shifting systems let you shift across multiple cogs if needed). Move the right shifter to make small adjustments in how easy and hard it is to pedal. It controls shifts across the cogs on the rear wheel and there are usually 8, 9 or 10 cogs meaning relatively small steps and changes in effort with each shift. Conversely, you operate the left shifter to make large adjustments in how easy/hard it is to pedal. It shifts across the 2 or 3 chainrings on the crankset (what the pedals are attached to), which vary significantly in size and make a large difference in pedaling effort with each shift.
  • It's best to avoid shifting into what's known as the "crossover gears." These are when the chain is on the smallest cog and the smallest chainring and when it's on the largest/largest combination. In these positions an extreme angle is set up, which can lead to noise and accelerated wear. While nothing will break if you shift into these extreme gears, it's best to avoid them as much as possible.
  • Unless you ride where it's flat and you don't need to shift very much, you should shift a lot to keep yourself pedaling easily and comfortably no matter what the terrain's like. Think of yourself as the bike's engine and try to maintain a steady pedaling speed with your legs and change gears anytime your legs feel like they're being slowed down or spinning too rapidly. Good cyclists are always shifting to keep their effort steady and easy and you should, too. And remember that you can't hurt the bike by shifting it! If you have any questions about all of this, just let us know and we'll explain on the phone or demonstrate here in the shop. Shifting is fun!
Shifting the right lever (see the 6 illustrations below) controls the rear derailleur and moves the chain onto the different cogs in the rear. Notice that there is one shift lever, the silver one tucked in behind the brake lever. You move this lever to shift and in only one direction, pushing it inward toward the center of the bike as follows:

When you're just riding along, your hand can rest on the top of the lever (called the "brake hood") or on the lower part of the handlebars. In both positions it's easy to reach and operate the shift lever.The right lever is for shifting the rear derailleur.
When you feel like it's too hard to pedal and want to shift into an easier gear, push inward on the shift lever. A long push moves the rear derailleur, which in turn shifts the chain onto the next larger cog making it easier to pedal. The lever will click twice with each long push. Push the lever again to shift into an easier gear, and so on.
Long pushes on the shift lever (silver), shift the bike into easier-pedaling cogs.
When you feel like it's too easy to pedal and you'd like a harder gear, push the shift lever inward again. But, this time use a short push, which moves the rear derailleur, which in turn shifts the chain onto the next smaller cog making it harder to pedal. The lever will click once. Repeat as needed.Short pushes on the shift lever (silver), shift the bike into harder-pedaling cogs.
Shifting the left lever (see the 6 illustrations below) controls the front derailleur and moves the chain onto the different chainrings. Notice that there is one shift lever, the silver one tucked in behind the brake lever. You move this lever to shift and in only one direction, pushing it inward toward the center of the bike as follows:

The left lever operates just like the right lever. Because there are only 2 chainrings, and they vary in size so much, the lever must be pushed a little further to complete a shift. Like the right lever, you can shift with your hand resting on the top of the lever and when you're on the lower part of the bars, too.The left lever is for shifting the front derailleur.
When you need to make it a lot harder to pedal (as you will when you crest a hill and start going a lot faster down the other side), you push inward on the shift lever. A long push shifts the chain onto the larger chainring making it a good bit harder to pedal. The lever will click twice.A long push on the shift lever (silver), shifts the chain onto the large chainring (harder-pedaling).
When you need to make it a lot easier to pedal (as you will when you come to uphills), you push the lever inward again. But, this time you use a short push (one click). This shifts the chain onto the smaller chainring, which makes it a lot easier to pedal the bike.A short push on the shift lever (silver), shifts the bike onto the small chainring (easier-pedaling).
That's all there is to it! Now, with a little practice you'll be shifting up a storm and having more fun than ever. Remember, if you have any questions about shifting or anything else cycling, just drop by. We're always happy to help! And, please keep in mind, that if your derailleurs are out of adjustment and your bicycle isn't shifting properly any more we're happy to help you with the problem and get your bike shifting like a champ again. Just let us know. Thanks!